The Critical Metrics Lenders Actually Look At Before They Say Yes
Every week I talk to business owners who walked into a commercial lender's office unprepared — not because they weren't smart, not because their business wasn't solid, but because nobody ever told them what lenders actually look at.
They came in thinking about rate. The lender was thinking about five other things first.
This article is the one I wish every borrower had read before they sat down across from an underwriter. These are the metrics that determine whether you get approved, how much you can borrow, and what your deal actually looks like on paper. Understand them before you apply, and you will have a fundamentally different experience.
1. Debt Service Coverage Ratio (DSCR)
If there is one number that governs commercial lending more than any other, it is DSCR — the Debt Service Coverage Ratio.
The formula: Net Operating Income divided by annual debt service (your total loan payment for the year).
A DSCR of 1.25x means your income covers the proposed debt payment by 25%. Most conventional commercial lenders require a minimum of 1.20x to 1.35x. SBA lenders typically want 1.25x on a "global" basis — meaning they look at all your income and all your debt obligations, personal and business combined.
Below 1.0x means the property or business does not generate enough income to cover its own debt payments. Most conventional lenders will not go there.
Why it matters before you apply: if you run this calculation before you walk in the door, you know exactly how large a loan your income supports. No surprises when the underwriter comes back with a number lower than you expected.
2. Loan-to-Value Ratio (LTV)
LTV is the lender's collateral protection metric. Loan amount divided by appraised value of the collateral.
A $700,000 loan on a $1,000,000 property is 70% LTV. The lender has a 30% equity cushion — if the deal goes sideways and they have to liquidate, they have room to recover their money.
Typical LTV limits by loan type:
- Conventional commercial real estate: 70–75%
- SBA 7(a): up to 90% in some structures
- SBA 504 (owner-occupied): effectively 90% (10% down)
- Bridge loans: 65–75% of as-is value
- Hard money: 60–70%
LTV and DSCR work simultaneously. You are limited by whichever constraint produces the lower loan amount. A property might support a $900,000 loan on LTV but only a $750,000 loan based on its income. You get $750,000.
3. Net Operating Income (NOI)
NOI is the income number that drives commercial real estate valuation and loan sizing. It is not net profit. It is not gross revenue. It is specifically:
Gross scheduled income, minus vacancy and credit loss, minus operating expenses — before debt service, depreciation, or income taxes.
The reason NOI excludes debt service is intentional. Lenders want to measure what the property produces independent of how it is financed, so they can apply their own DSCR standard to it.
NOI also determines value through capitalization: Value = NOI ÷ Cap Rate. A property generating $100,000 in NOI in a 7% cap rate market is worth approximately $1,428,571. Improve the NOI by $10,000 and that property is now worth roughly $142,000 more.
Knowing your NOI before you approach a lender means knowing both your property's value and the maximum loan it can support.
4. Credit Score — Personal and Business
Personal credit is heavily weighted for small business lending, particularly for SBA loans, where every owner with 20% or more of the business is required to personally guarantee the debt. Most SBA lenders want to see a personal FICO of 650 or above, though requirements vary by lender and loan type.
Business credit — tracked separately by Dun & Bradstreet (the PAYDEX score), Experian Business, and Equifax Business — becomes increasingly important as a business matures and establishes its own financial identity. A PAYDEX score of 80 means bills are paid on the due date. 100 means they are paid early.
The key thing to understand: different loan types weight credit differently. A conventional SBA 7(a) loan is heavily credit-driven. An asset-based equipment loan or invoice factoring arrangement is primarily collateral-driven — your credit matters far less than the value of the asset securing the transaction.
If your personal credit has a complicated history, that does not close all doors. It redirects you toward the right ones.
5. Loan-to-Cost Ratio (LTC) — For Construction and Acquisitions
LTC is the construction-lending equivalent of LTV. It measures the loan as a percentage of total project cost rather than appraised value.
On a ground-up commercial construction project with a total development cost of $3,000,000, a 90% LTC loan provides $2,700,000. The developer brings $300,000 in equity.
LTC matters for business acquisitions too. When you are buying a business, the lender is looking at the purchase price as the "cost" — not an appraised value in the traditional sense. SBA 7(a) acquisition loans can go to 90% LTC in some structures, which is one of the primary reasons the SBA program is so powerful for business buyers.
6. Global Cash Flow
SBA lenders and many conventional business lenders look beyond the specific business being financed. They want to see your global cash flow — the total picture of all your income sources and all your debt obligations.
Global DSCR = All income (business + personal) ÷ All annual debt service (existing + proposed)
This matters because a business owner with $80,000 in personal debt payments — mortgage, car loans, student loans — may have lower global DSCR even if the business deal looks strong in isolation. The lender wants to know that after everything is accounted for, you can service your obligations.
Before you apply for an SBA loan or conventional business loan, run your global cash flow picture. Add up all your personal debt obligations. Add up all your business debt obligations. Add the proposed new debt service. Compare the total to all sources of income. If the ratio is above 1.15x to 1.25x, you are likely in a fundable position.
7. Debt-to-Income Ratio (DTI) and Business Leverage
For business lending, lenders look at how leveraged the business already is relative to its income. A highly leveraged business — one carrying significant existing debt relative to EBITDA — has less room for additional debt service, which constrains how much new capital it can access.
Common leverage metrics lenders use:
- Total debt-to-EBITDA: most conventional lenders prefer 3x or below for business acquisitions
- Senior debt-to-EBITDA: often 2.5x or below for senior secured debt
- Fixed charge coverage ratio: similar to DSCR but includes lease obligations
If your business carries significant existing debt, knowing this ratio before you apply tells you how much additional debt capacity you realistically have.
8. Liquidity and Working Capital Position
Lenders — particularly SBA lenders — look at what you have left after the transaction closes. Post-closing liquidity is a real underwriting consideration. A borrower who drains every dollar of personal savings into a down payment and has nothing left for operating capital is a higher risk than one who completes the same transaction with reserves remaining.
SBA lenders often require evidence that the borrower has sufficient working capital to operate the business through its initial period. Franchise lenders specifically look for this.
Working capital = Current Assets minus Current Liabilities. A positive working capital position demonstrates that the business can meet its short-term obligations without reaching for emergency financing.
9. Collateral Quality and Marketability
Beyond the LTV number, lenders think about the quality of their collateral — specifically, how easily and quickly they could liquidate it if they had to.
A well-located multi-tenant retail property in a growing market is excellent collateral. A single-tenant special-purpose building in a small market is less liquid collateral, which is reflected in lower LTV allowances.
For equipment financing, lenders distinguish between equipment with strong secondary markets (commercial trucks, standard construction equipment, medical devices) and highly specialized equipment that is difficult to resell. The more marketable the collateral, the higher the advance rate.
This is why collateral type and location matter even when the LTV looks fine on paper. The lender is thinking about their exit before you think about yours.
10. Business and Industry History
Lenders look at how long you have been in business and what industry you operate in. Two years in operation is a common threshold for conventional bank lending — it represents enough history to evaluate revenue trends and financial performance.
Industry matters too. Some industries carry higher perceived risk: restaurants, hospitality, oil and gas, staffing. Others are seen as more stable: medical practices, established professional services, grocery-anchored real estate. Lenders have concentration limits in certain industries, which means they will sometimes decline a solid deal simply because they are already overexposed to that sector.
Knowing your industry's lending landscape before you apply tells you which lenders are naturally a better fit for your deal type.
Putting It Together Before You Apply
Here is the practical sequence I recommend to every business owner before they approach any lender:
First, calculate your DSCR on the proposed transaction. Does the income support the debt at the loan size you need?
Second, determine your realistic LTV. What is the appraised or market value of the collateral, and what percentage of that will the right lender advance?
Third, run your global cash flow. All income, all obligations, the proposed new debt service — does the ratio clear the lender's threshold?
Fourth, know your credit picture — both personal and business. Not because credit determines everything, but because it determines which lenders and which products are the right starting point.
Fifth, assess your post-closing liquidity. What do you have left after the transaction? Is it enough to operate?
A business owner who walks into a financing conversation having done this work is a completely different conversation than one who hasn't. Lenders respond to preparation. It signals that you understand your own deal, which directly affects their confidence in your ability to execute it.
If you want to work through these metrics on your specific deal before you approach anyone, that is exactly the kind of conversation I have every day.
The rate is the detail. Access is the decision.
When you're ready for a real conversation about what's available for your situation — not a rate quote, but an honest assessment of the right structure and the right lender — give me a call.
If you want to go deeper on the options available to businesses outside the conventional bank model, I've covered that on the blog:5 Options for Financing a Business
John Reynolds Weaver, CEO — W. Reynolds Commercial Capital, Inc.
(325) 440-5820 | john@reynoldscomcap.com | reynoldscomcap.com
Disclaimer
While this article accurately reflects the combined capabilities of all lenders and technology partners with whom W. Reynolds Commercial Capital, LLC has a relationship, not every lender will have all of these capabilities. Not all lenders will have the same services, technology platforms, pricing structures, or program features, and this article in no way guarantees the availability of any specific feature, advance rate, same-day funding, 24/7 portal access, proprietary early-pay software, insurance-backed protection, fuel card integration, or any other service for any individual borrower or transaction.
All financial solutions are subject to credit review, underwriting, due diligence, and final approval by the respective funding partner. Actual terms, conditions, and availability may vary based on the client, invoice quality, industry, collateral, and the policies of the selected lender.
This article is provided for informational and educational purposes only and does not constitute a commitment, offer, or guarantee of funding or any particular terms.
For a no-obligation review of your business financing needs and the options currently available through our network, please contact us directly.
Comments
Post a Comment